Products-Guowang Cable Group

Products

Products

THHN / THWN-2 Aluminum alloy Electric Wire
Low voltage electrical energy distribution; for use in electrical wiring of buildings, feeder circuits, branches and secondary industrial, commercial and residential indoor networks. Special for installations in abrasive sites or sites contaminated with oil, grease, gasoline, and other chemical substances. They are suitable for installation in ducts, pipes, boards, and cable trays according to RETIE article 20.3 literal J, from 12 AWG gauge and larger.
Copper RHW-2 Wire
Copper RHW-2 wire is a high-performance cable with annealed (soft) copper conductors for excellent electrical conductivity. Its insulation material is cross-linked polyethylene (XLPE), which has excellent heat and moisture resistance, and can operate in dry or humid environments with a maximum operating temperature of up to 90°C. The RHW-2 cable is rated for 600 volts.
RHH Copper Conductor Cable
RHH cable is a thermosetting insulated power cable compliant with US UL standards, primarily UL 44. It is widely applied in building power distribution, industrial equipment, outdoor wiring and other scenarios.
RW90 Copper Wire 600V XLPE Insulation Cable
Copper RW90 is for open wiring used in raceways (except cabletroughs and ventilated fexible cableways) in dry or wet locations. For open wiring exposed to the weather. Minimum recommended installation temperature minus 40°C (with suitable handling procedures). Maximum conductor temperature 90°C.
RW90 XLPE Cable 600V Aluminum Conductor
Aluminum RW90 is for open wiring used in raceways (except cabletroughs and ventilated fexible cableways) in dry or wet locations. For open wiring exposed to the weather. Minimum recommended installation temperature minus 40°C (with suitable handling procedures). Maximum conductor temperature 90°C.
XHHW-2 Aluminum Conductor
XHHW cable can be used as a building line, widely used in highrise buildings, subways, commercial offices and other large public places, can also be used in photovoltaic power stations, mobile energy storage power stations, wind energy storage systems and other new energy fields.XHHW-2 conductors is suitable for use in dry locations at temperatures not to exceed 90°C.
XHHW-2 Copper Conductor
XHHW cable can be used as a building line, widely used in highrise buildings, subways, commercial offices and other large public places, can also be used in photovoltaic power stations, mobile energy storage power stations, wind energy storage systems and other new energy fields.XHHW-2 conductors is suitable for use in dry locations at temperatures not to exceed 90°C.
THHN / THWN-2 Copper Electric Wire PNS35-1
THHN/THWN copper wire is insulated with PVC (polyvinyl chloride) and covered with nylon sheath, with a rated voltage of 600V. It is flame retardant and moisture resistant and is mainly used for permanent installations of lighting, heating and electricity.
NMD 90 Copper Cable 300V
NMD90 cables may be used for both exposed work in dry locations or concealed work in dry or damp locations. NMD90 cables are available in two or three cores with an exposed ground conductor.
NMD90 300V – Aluminum Conductors
Guowang Cable Group manufactures CSA approved aluminum NMD90. Cables are manufactured with three 8000 series aluminum ACM conductors insulated with RW90 cross-linked polyethylene rated at 300 volts from #8 to #2 AWG. The bonding conductor is bare aluminum. These cables are made identically to the copper based ones.

12 3 4 ›››

Home WhatsApp Mail Inquiry